modern-day THROWBACK
When STEINWAY & SONS was founded in 1853, the standard hardware found on pianos was nickel — a trend that continued through the 1920s. In 1928, following design trends of the day, the hardware on STEINWAY pianos was switched to brass, which has been the standard since. Now, STEINWAY & SONS offers a piano style that is both modern and a throwback — the STERLING STEINWAY.
Featuring beautiful nickel hardware and a silver cast-iron plate, as well as a high-polish polyester finish, these stylish pianos combine the ultimate in modern design with the unmistakable STEINWAY SOUND.
This magnificent 6' 11" (211 cm) grand piano is often referred to by pianists as “the perfect piano.” It is a wonderfully balanced and versatile instrument that does extremely well in refined homes, teaching studios, and mid-sized venues.
Dimensions
Length: 6' 11" (211cm)
Width: 58" (148 cm)
Net Weight: 760 pounds (345 kg)
Braces
4 solid spruce braces with a volume of 1,995 cu. in. (32,686 cm3); Spruce provides tensile strength with less weight. Maple dowels fasten braces to rim producing a single homogenous foundation upon which is built the entire tonal component. A cast iron treble bell, affixed to rim's underside at treble bend, holds plate firmly in position by means of a steel bolt. The Steinway & Sons iron wedge anchors brace ends securely to crossblock assuring permanent rim posture.
Scale
Overstrung; combination agraffe; Front AND rear duplex.
Tension: 39,047 lbs. (17,571 kg)
Ribs
Made from durable, resinous sugar pine to assure strong and constant support of string down-bearing on the soundboard; rib ends are hand-fitted.
Tuning pins
Premium blued steel; rust-resistant, nickeled heads
Strings
Treble: twelve whole & one-half sizes from high-tensile Swedish steel.
Bass: Swedish steel core wire wound with pure copper.
Longest: Agraffe/bridge: 59¼" (151 cm)
Hammers
Premium wool top felt and under felt; treated to resist insects and moisture. Compression-wired to maintain permanent shape. Hard rock maple hammer moldings and shanks.
Dampers
Horizontal-cut premium wool for effective dampening with maple heads for endurance.
Keys
European spruce, individually weighed-off. Chip-proof, stain-resistant coverings for naturals; slip-proof, adbraded ebonized sharps. Durable Linden wood buttons reinforce keys over balance rail, permitting maximum tonal power with every strike. Longest key: 21" (53.3 cm).
Keybed
Made from planks of quarter-sawn spruce. Horizonal and vertical birch planks present a vented system for humidity escapement. Crowned and reverse-crowned action frame gives a snug fit, intensifies key movement and prevents “slapping” during heavy playing. Large maple dowel ends provide a solid mount for adjustable brass touch-regulating screws. Thickness: 1¾" (4.45 cm).
Pedals
Heavy, solid brass. Soft, sustaining, and full sostenuto.