FLUID AUDIO SRI-2 | 24/192 Usb Desktop Audio Interface

The Fluid Audio SRI-2 is a desktop 2x2 USB audio interface and monitor controller offering pristine recording and convenient speaker switching for singer-songwriters, producers, and guitarists. It features two XLR-1/4" combo inputs that support mic, line, or Hi-Z inputs, allowing you to record microphones, mixers, or instruments through high-resolution 24-bit / 192 kHz converters to your favorite DAW. The two Class-A microphone preamps provide 48V phantom power and low-noise performance.

With four 1/4" TRS monitor outputs, a 1/4" stereo headphone output, an A/B speaker selector, and separate speaker/headphone level controls, you can easily listen through your preferred monitors and headphones. A sum switch is provided for quickly checking your mix for phase discrepancies in mono. Thanks to its sturdy aluminum chassis and USB powering, the SRI-2 is well suited for portable applications such as mobile recording or mixing on the road.

• Anodized aluminum chassis housing with angled top panel
• High-resolution 24-bit / 192 kHz digital conversion
• Two Class-A microphone preamps with globally switchable 48V phantom power
• Two XLR-1/4" combo inputs for mic/line/instrument recording
• Per-input line/instrument switch
• Four 1/4" TRS outputs for two monitor pairs with A/B button
• Solid aluminum volume knob with rubber grip
• 1/4" stereo headphone output with dedicated volume control
• Two 6-segment input meters
• LED indicators for all buttons and knobs
• Direct-monitoring knob provides zero-latency tracking
• Powered via USB 2.0 connection
• Compatible with Mac/Windows computers and iPads (Apple Camera Connection Kit and additional power supply required for use with iPad)
• Includes download card for Cubase LE (for Mac/Windows) and Cubasis LE (for iPad)

Specifications

• Channels of I/O
  • Analog: 2 Input / 2 Output at 192 kHz
• Maximum Sampling Rate
  • 192 kHz / 24-Bit
• Number of Microphone Inputs
  • 2 Preamps
• Analog Audio I/O
  • 2 x Combo XLR-1/4" TRS Balanced/Unbalanced Mic/Line/Hi-Z Input
  • 4 x 1/4" TRS Balanced Monitor Output
  • 1 x 1/4" TRS Unbalanced Headphone Output 
• Host Connection
  • 1 x USB-B
• OS Compatibility
  • macOS 10.6.4 or Later
  • Windows 7 or Later
  • iOS
• Power Requirements
• USB Bus Power
• Gain/Trim Range
  • Mic Inputs: +6 dB to +46 dB
  • Hi-Z Inputs: +12 dB to +52 dB
  • Line Inputs: -11 dB to +29 dB
• Analog Audio I/O
  • 2 x Combo XLR-1/4" TRS Balanced/Unbalanced Mic/Line/Hi-Z Input
  • 4 x 1/4" TRS Balanced Monitor Output
  • 1 x 1/4" TRS Unbalanced Headphone Output
• Phantom Power
  • 48 V, Selectable On/Off (Applied to All Inputs)
• Frequency Response
  • 20 Hz to 20 kHz ±0.1 dB
• Maximum Input Level
  • Mic Inputs: +7 dBu
  • Hi-Z Inputs: +4 dBu
  • Line Inputs: +25 dBu
• Maximum Output Level
  • Monitor Outputs: +6 dBFS
  • Headphone Outputs: +12 dBu
• Headphone Output Power
  • 75 mW per Channel into 32 Ohms
• Impedance
  • Mic Inputs: 100 Ohms
  • Hi-Z Inputs: 1 Megohm
  • Line Inputs: 20 Kilohms
  • Monitor Outputs: 75 Ohms
  • Headphone Outputs: < 10 Ohms
• Dynamic Range
  • Mic/Line/Hi-Z Inputs: 104 dBA
  • Monitor Outputs: 102 dBA
  • Headphone Outputs: 100 dBA
• THD+N
  • Mic Inputs: 0.0016%
  • Hi-Z Inputs: 0.0031%
  • Line Inputs: 0.005%
  • Monitor Outputs: 0.0014%
  • Headphone Outputs: 0.006%
• EIN
  • Mic Inputs: < -120 dBu A-Weighted
• Sample Rates
  • 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz
• Bit Depths
  • 24-Bit
• Latency
  • Zero-Latency Direct Monitoring
• Sync Sources
  • Internal
• OS Compatibility
  • macOS 10.6.4 or Later
  • Windows 7 or Later
  • iOS
• Required Hardware
  • Available USB 2.0 Port
  • USB Cable (Included)
  • Lightning to USB Adapter (Not Included)
• Internet Connection
  • Required for Software/Driver Download
• Power Requirements
  • USB Bus Power
• Anti-Theft Features
  • Kensington Security Slot
• Weight
  • 2.3 lb / 1.0 kg