EARTHWORKS TC30 Omni Microphone For Loud Sources
- Catalog #: TC30
- *EOL*
Omnidirectional condenser microphone for recording & live performances
The TC30 is an omnidirectional microphone designed for recording louder sources such as drums, percussion, amplified instruments and loud sound effects.
Performance
With a whopping SPL rating of 150dB the TC30 has plenty of headroom, so there is no need to worry about distortion, even with the loudest instruments. And there is no proximity effect, so you can get the TC30 as close as you want to the sound source.
With an extended 9Hz – 30kHz ruler-flat frequency response, the result is a more accurate representation of the original sound. Its transient response is ultra fast, handling sharp attacks with ease, while still picking up all of the subtle nuances and softest dynamics of your playing. The TC30 is time coherent, precisely capturing high and low frequency sounds with no phase errors, which will smear transients and create other time related distortions.
Its near-perfect omnidirectional polar pattern is uniform across all specified frequencies, letting the microphone capture rich and consistent detail at any position around the capsule.
Designed for recording louder sources such as drums, percussion, amplified instruments and loud sound effects.
Features:
- General purpose omni
- Ideal for a wide variety of instruments and vocals, including acoustic guitar, string instruments and piano
- Frequency response goes to 30kHz
- Fast, clean impulse performance yields a remarkably transparent sound
- Omnidirectional polar pattern
- Accurate and uncolored
- No handling noise, no proximity effect and is very forgiving in terms of placement
- Effortlessly handle high sound pressure levels up to 150dB SPL while simultaneously capturing subtle details
- Fast impulse response and diaphragm settling time
- Exceptional flat frequency response and are time coherent, so they sound natural and uncolored
Specifications:
- Frequency Response: 9Hz to 30kHz
- Polar Pattern: Omnidirectional
- Sensitivity: 8mV/Pa (-42dBV/Pa)
- Power Requirements: 24-48V Phantom, 10mA
- Max Acoustic Input: 150dB SPL
- Output: XLR (pin 2+)
- Output Impedance: 65Ω balanced (between pins 2 & 3)
- Min Output Load: 600Ω between pins 2 & 3
- Noise: 26dB SPL equivalent (A weighted)
- Dimensions L x D: 229mm x 22mm (9 x .860 inches)
- Weight: .5 lb. (225g)
