2-Person Wireless Fixed-Frequency Handheld Microphone System (563 to 565 MHz)
The CAD WX200 is an easy to operate two-person wireless handheld microphone system with a dual-channel tabletop receiver for presenters, singers, performers, clergy, and instructors. Both transmitters and the receiver are preset to their wireless UHF frequencies at the factory, so it's quick and simple to get started. This inexpensive, entry-level system is suitable for A/V installations in business and educational settings, houses of worship, or on musical stages.
Two TX200 Handheld Mics Tailored for Clear Vocals and Speech
Each TX200 handheld mic/transmitter is equipped with a dynamic mic capsule optimized for clarity and speech intelligibility.
Its cardioid polar pattern focuses audio capture on the speaker or singer holding the mic, minimizing unwanted background noise and feedback.
Quick and Easy to Use
Set up is easy; simply power up the receiver and transmitters and you're ready to go. The components are preset to transmit and receive the wireless audio data on fixed frequencies.
The system provides wireless transmission at a range up to 164' between the transmitters and receiver.
Each transmitter will run for up to 10 hours on two AA batteries.
The two-channel receiver features a volume control on each channel to accommodate varying speech/vocal levels.
Backlit LCD displays on the transmitters and receiver show important information.
The receiver's rear-panel connections include two balanced XLR outputs (one for each channel) and an unbalanced 1/4" output (both channels summed) to connect to any mixing board or PA system.
The all-metal, tabletop receiver is rugged and portable.
Specifications
Wireless Technology
Analog UHF
Diversity
Non-Diversity
RF Frequency Band
563 to 565 MHz
Number of RF Channel Frequencies
2
Max Operating Range
164' / 50 m (Line of Sight)
Max Transmitters per Band
2
Dynamic Range
>100 dB
Receiver Type
1x Tabletop
Antenna
2x Fixed External (Rear-Mount)
Number of Audio Channels
2
Audio I/O
2x XLR 3-Pin Balanced Output
1x 1/4" TS Unbalanced Output
Frequency Response
30 Hz to 18 kHz
Display
LCD (Non-Backlit)
Power Requirements
AC/DC Power Adapter
Microphone
2x Handheld
RF Output Power
5 mW
Antenna
Fixed External
Input Level
Microphone
Muting
Off/On Switch
Display
Backlit LCD
Microphone Type
2x Handheld
Polar Pattern
Cardioid
Frequency Response
40 Hz to 16 kHz
Color
Black
Microphone Battery Type
2x AA
Battery Life
10 Hours
Input Power
12 to 15 VDC at 450 mA
Receiver Housing
Metal
Dimensions
Receiver: 14.2 x 10.2 x 2.4" / 36.1 x 25.9 x 6.1 cm
Microphone: Not Specified
Weight
Receiver: 3.2 lb / 1.5 kg
Microphone: Not Specified
In The Box
CAD WX200 2-Person Wireless Fixed-Frequency Handheld Microphone System (563 to 565 MHz)