AUDIO-TECHNICA BP4025 X/y Stereo Field Recording Microphone
$949.00
Special Order
SKU
233786
- Catalog #: BP4025
BP4025
X/Y Stereo Field Recording Microphone
Designed for broadcast and professional recording, Audio-Technica’s BP4025 stereo condenser offers large-diaphragm capsules in an innovative coincident capsule configuration. This allows for a smaller housing while producing an X/Y stereo image with the spatial impact and realism of a live sound field. Ideal for use with professional audio and video equipment, the microphone is fully RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).
- Large-diaphragm capsules offer pristine sound quality and exceptionally low noise
- Innovative coincident capsule configuration produces accurate stereo image in smaller housing
- Compact, lightweight design is ideal for camera-mount use
- Excellent channel separation
- Phantom power operation—for use with professional equipment Switchable low-frequency roll-off and 10 dB pad
- Includes one balanced cable (two 3-pin XLRM-type connectors at output)
- RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)
Specifications
- Element
- Fixed-charge back plate permanently polarized condenser
- Polar Pattern
- X/Y Stereo
- Frequency Response
- 20-17,000 Hz
- Low Frequency Roll Off
- 80 Hz, 12 dB/octave
- Open Circuit Sensitivity
- -32 dB (25.1 mV) re 1V at 1 Pa
- Channel Balance
- <2.5 dB
- Maximum Input Sound Level
- 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
- Dynamic Range
- 131 dB, 1 kHz at Max SPL
- Signal-to-Noise Ratio
- 80 dB, 1 kHz at 1 Pa
- Phantom Power Requirements
- 11-52V DC, 7 mA typical (both channels total)
- Switches
- Flat, roll-off; 10 dB pad (nominal)
- Weight
- 269 g (9.5 oz)
- Dimensions
- 186.0 mm (7.32") long, 47.6 mm (1.87") head diameter 21.0 mm (0.83") body diameter
- Cable
- 5.0 m (16.5') long, 8 conductor, shielded, vinyl-jacketed stereo cable with 5-pin XLRF-type connector at microphone end and two 3-pin XLRM-type connectors at output end
- Output Connector
- Integral 5-pin XLRM-type
- Accessories Included
- AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; soft protective pouch
- Audio-Technica Case Style
- S12
Write Your Own Review
