AKG ACOUSTICS C3000 | Large Diaphragm Condenser Microphone
$549.99
In Stock
SKU
153793
- Catalog #: 2785X00230
- BLACK FINISH
C3000
High-performance large-diaphragm condenser microphone
A sound investment for every studioa studio and on-stage standard for vocals, guitar, drums and brass instruments.
The C3000 high-performance, large-diaphragm condenser microphone has been a standard for live applications and studio recording for almost two decades. It is an excellent choice for vocals, electric and acoustic guitars, drum overhead and brass instrument miking. The switchable attenuation pad and low-cut filter enable high SPL up to 150dB and eliminate proximity effect.
The redesigned C3000 presents itself as a cost-effective, rugged workhorse with a sleek and classy finish.
Features
- Proven performance for more than 15 years
- the standard for live applications and studio recording
- Ultralow-noise electronics and switchable attenuation pad
- enable high dynamic range and allow SPL up to 150dB
- Switchable low-cut filter
- eliminates proximity effect
- Classic sound made affordable
- gold-sputtered one-inch capsule tuned in the tradition of AKG´s sonic expertise
- Heavy-duty die-cast metal housing
- provides maximum protection on stage and in the studio
Specifications
- Type: 1-inch large-diaphragm pressure gradient microphone
- Polar patterns: cardioid
- Sensitivity at 1000 Hz: 20mV/Pa (-32 dBV)
- Frequency range: 20 to 20,000 Hz (referto frequency response curve)
- Electrical impedance: 200 ohms
- Recommended load impedance:1000 ohms
- Bass cut filter slope: 6 dB/octave below 500 Hz
- Preattenuation pad: -10 dB, switchable
- Equivalent noise level to IEC 60268-4(A-weighted): 14 dB-A
- Signal/noise ratio re 1 Pa (A-weighted): 80 dB*)
- Max. SPL for 0.5% THD (0/-10 dB): 200 / 630 Pa Z140 / 150 dB SPL*)
- Dynamic range: 126 dB (A-weighted)*)
- Temperature: -10°C to +60°C (14°F to 140°F)
- Relative humidity: 90% (+20°C/68°F), 85% (+60°C/140°F)
- Power requirement: 9 to 52 V phantom power to IEC 61938
- Current consumption: 2 mA
- Connector pinout: 3-pin male XLR to IEC standard
- Size: max. dia.: 53 mm (2.1 in.), length: 162 mm (6.4 in.)
- Net weight: 320 g (14.1 oz.)
Write Your Own Review
