Facebook Pixel

ADAM PRO AUDIO T5V | 5-inch Active Ribbon Nearfield Monitor

ADAM PRO AUDIO T5V | 5-inch Active Ribbon Nearfield Monitor

GENELEC 8020-SURROUND-PAK | 5.1 Surround Sound Package W/ 5x 8020dpm & 1x 7050cpm

GENELEC 8020-SURROUND-PAK | 5.1 Surround Sound Package W/ 5x 8020dpm & 1x 7050cpm

ADAM PRO AUDIO T7V | 7-inch Active Ribbon Nearfield Monitor (each)

$349.00
In Stock
SKU
203222
  • Catalog #: AD-T7V
  • EACH






Attention! Store stock availability may not be up to date and may be “open box” inventory.      

  1. Phone your preferred store Store to confirm availability and condition.      
  2. Contact your preferred store Store to confirm availability and condition.      


Vancouver Store
728 Granville St.
Vancouver, BC, V6Z 1E4
Phone Store 604-685-8471
  Contact Store Out Of Stock

Coquitlam Store
2560 Barnet Hwy.,
#116 Coquitlam, BC, V3H 1W3
Phone Store 604-941-8447
  Contact Store Out Of Stock

Langley Store
19638 Fraser Highway
Langley, BC, V3A 4C5
Phone Store 604-532-8303
  Contact Store Out Of Stock

Richmond Store
#150-3631 No. 3 Road
Richmond, BC, V6X 2B9
Phone store 604-273-6661
  Contact Store Out Of Stock

Victoria Store
#105-2401D Millstream Road
Victoria, BC, V9B 3R5
Phone Store 250-383-5222
  Contact Store Out Of Stock

ADAM T7V

The T7V is a two-way studio monitor designed for vertical use in a nearfield application.

The T7V features a 7” woofer that provides bass extension down to 39 Hz, while the U-ART tweeter’s diaphragm provides pristine and extended high-frequency response up to 25 kHz – virtually unheard of in monitors in this price range. The U-ART tweeter is fitted to a precision waveguide with the same dispersion-control attributes as the High Frequency Propagation (HPS) waveguide used in ADAM Audio’s flagship S Series studio monitors. The waveguide’s highly uniform dispersion of high frequencies provides an incredibly wide sweet spot that frees you from being glued to a rigid mix position while working.

On the rear side of the T7V’s beveled cabinet, a rear-firing bass reflex port joins a sturdy metal backplate that’s home to the analog input connections. The U-ART tweeter is powered by a 20 W Class-D amp, while a 50 W Class-D amp serves the woofer. These new powerhouses yield an impressive maximum of 110 dB SPL per pair.

The wide frequency response, high dynamic range, excellent transient response, wide sweet spot and small footprints make the T7V perfectly suited for use in small control rooms for music production, video post-production and broadcast production – a great fit for the modest budgets that many facilities need to work with.

The ADAM Sub8 subwoofer is the perfect match to complement the T7V to extend the capabilities of monitoring in the bottom end.

FEATURES & BENEFITS

PRODUCT FEATUREBENEFIT TO THE CUSTOMER
U-ART 1.9” Accelerated Ribbon Tweeter
  • Allows longer operation with fewer signs of fatigue
  • Their breakup is prevented by the folded diaphragms, distortions are effectively reduced to a minimum
  • Advanced dynamic range due to acoustically effective diaphragm surface that is 2.5 times bigger (compared to a classic tweeter according to the piston principle)
The air velocity ratio of 4:1 during the sound generation by folded U-ART membrane

Direct, fast response in the high-range even with complex transients

HPS waveguide from the S Series
  • Makes dispersion more consistent and imaging more stable over a wider area
  • Reduction of early reflections on the surfaces of, e.g. mixing consoles, desks, etc.
Lightweight polypropylene construction of the woofer

Excellent transient response even at high sound levels without breakup of the diaphragm

Vertical 2-way system with 7” woofer

High resolution of the stereo image

Spacious rear-firing bass reflex port

Bass reproduction with very low compression

Linear frequency response of 39 Hz to 25 kHz

Unbiased reproduction in a wide frequency band

Maximum peak sound pressure per pair in 1 m ≥ 110 dB

Powerful, compression-free sound reproduction even at very high sound levels

DSP-powered crossover design

Smooth frequency response without interferences between the drivers in the critical mid-range

Simple room acoustic adjustments via high- and low-shelf filters

Allows optimal adaptation to acoustically difficult listening environments or individual preferences

Analog inputs over XLR and RCA

Optimized for balanced and unbalanced line signals

Acoustically optimized cabinet geometry

Reduction of unwanted reflections on the cabinets

Compact cabinet dimensions

Fits every desktop

2 years warranty with optional extension to 3 years with the registration of the product

Full repair service if required for 5 years

TECHNICAL DATA

WOOFER

Number 1
Basket Ø 7" (178 mm)
Cone Material Polypropylene

TWEETER

Number 1
Type U-ART
Diaphragm Area 4 inch² (2420 mm²)
Equiv. Diaphragm Ø 1.9" (48 mm)
Velocity Transform Ratio 4:1
Diaphragm Weight 0.17 g
Waveguide HPS

BUILT-IN AMPLIFIERS

Number 2
Woofer 1
Type PWM
Amp. Power RMS 50 W
Tweeter 1
Type PWM
Amp. Power RMS 20 W

CONTROL OPTIONS

Input Sensitivity Switchable +4 dBu / -10 dBV
Gain Yes
High-Shelf - 2 dB, 0 dB, +2 dB
Low-Shelf - 2 dB, 0 dB, +2 dB

INPUT CONNECTORS

Analog XLR, RCA
Input Impedance 10 kOhm / 20 kOhm

GENERAL DATA

Panel Rear
Frequency Response 39 Hz - 25 kHz
THD > 80 Hz 0.5 %
Max. SPL per pair at 1 m ≥110 dB
Crossover Frequency 2.6 kHz
Max. Power Consumption 132 W
Weight 15.7 lbs (7.1 kg)
Height x Width x Depth 13.7" x 8.3" x 11.5” ( 347 mm x 210 mm x 293 mm)
Warranty 5 years (2 years warranty plus 3 years optional with product registration)
Delivery Contents Power cord, Quick Start Guide
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account